Generate QR code
Open Access
Subscription Access
Improved Complex for Studying the Kinetics of Extraction of Target Components in a Solid–Liquid System
https://doi.org/10.17586/0021-3454-2025-68-12-1088-1093
Abstract
The method, its implementing device, and software have been improved, collectively designed to study the stages of the extraction process of target components from porous materials in real time. The updated software enables the determination of optimal operating modes and conditions for extraction processes, closely resembling actual process conditions. The proposed development can be used to study processes involving changes in the mass and/or volume of the porous solid being studied while suspended in a liquid.
About the Authors
A. V. Efimov
All-Russian Research Institute of Fats
Russian Federation
Russian Federation
Andrey V. Efimov — All-Russian Research Institute of Fats, Laboratory of Automation and Computer Engineering
St. Petersburg
V. N. Markov
All-Russian Research Institute of Fats
Russian Federation
Russian Federation
Vladimir N. Markov — PhD, Senior Researcher; All-Russian Research Institute of Fats, Department of Vegetable Oils Production; Head of the Department
St. Petersburg
Sh. K. Tagiev
All-Russian Research Institute of Fats
Russian Federation
Russian Federation
Shafi K. Tagiev — All-Russian Research Institute of Fats, Laboratory of Automation and Computer Engineering
St. Petersburg
A. N. Lisitsyn
All-Russian Research Institute of Fats
Russian Federation
Russian Federation
Alexander N. Lisitsyn — Dr. Sci., Associate Professor; All-Russian Research Institute of Fats; Director of the Institute
St. Petersburg
A. N. Manuilov
All-Russian Research Institute of Fats
Russian Federation
Russian Federation
Andrey N. Manuilov — PhD; All-Russian Research Institute of Fats; Leading Specialist
St. Petersburg
References
1. Akselrud G.A., Lysyansky V.M. Ekstragirovaniye (sistema tverdoye telo–zhidkost’) (Extraction (Solid-Liquid System)), Leningrad, 1974, 256 р. (in Russ.)
2. Akselrud G.A., Altshuller M.A. Vvedeniye v kapillyarno-khimicheskuyu tekhnologiyu (Introduction to Capillary-Chemical Technology), Moscow, 1983, 263 р. (in Russ.)
3. Wakelyn Ph.J., Wan P.J. Microstructural Principles of Food Processing and Engineering, Food Engineering Series, 1999, 432 р.
4. Beloborodov V.V. Izvestiya vuzov, Pishchevaya tekhnologiya, 1986, no. 3, pp. 6–11. (in Russ.)
5. Beloborodov V.V., Zabrovsky G.P., Voronenko B.A. Protsessy masso- i teploperenosa maslozhirovogo proizvodstva (Mass and Heat Transfer Processes in Oil and Fat Production), St. Petersburg, 2000, 430 р.
6. Rzhekhin V.P., Sergeev A.G., ed., Rukovodstvo po metodam issledovaniya, tekhnokhimicheskomu kontrolyu i uchotu v maslozhirovoy promyshlennosti (Guide to Research Methods, Technochemical Control and Accounting in the Oil and Fat Industry), Leningrad, 1965, vol. II, рр. 384–388. (in Russ.)
7. Claux O., Rapinel V., Goupy P., Patouillard N. et.al. ACS Sustainable Chem. Eng., 2021, vol. 9, рр. 7211−7223, DOI:10.1021/acssuschemeng.0c09252.
8. Gerasimenko E.O., Butina E.A., Kharchenko S.A., Achmiz E.P., Vorontsova O.S. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 2016, no. 7(2), pp. 609–623.
9. Markov V.N., Lisitsyn A.N., Tagiev Sh.K., Efimov A.V. Bulletin of the All-Russian Research Institute of Fats, 2018, no. 2, pp. 32–37. (in Russ.)
10. Markov V.N., Efimov A.V., Tagiev Sh.K., Lisitsyn A.N. Bulletin of the All-Russian Scientific Research Institute of Fats, 2020, no. 1-2, pp. 9–11. (in Russ.)
Review
For citations:
Efimov A.V., Markov V.N., Tagiev Sh.K., Lisitsyn A.N., Manuilov A.N. Improved Complex for Studying the Kinetics of Extraction of Target Components in a Solid–Liquid System. Journal of Instrument Engineering. 2025;68(12):1088-1093. (In Russ.) https://doi.org/10.17586/0021-3454-2025-68-12-1088-1093
Views:
8
JATS XML
Email this article 