Intelligent approaches to automation of technological preparation for polymer products manufacturing by injection molding
https://doi.org/10.17586/0021-3454-2023-66-1-16-24
Abstract
A review of modern intelligent automation approaches used at various stages of technological preparation for polymer products production by injection molding is presented. Based on the literature review, a scheme of technological preparation using the considered methods is proposed, which is aimed at increasing its efficiency.
About the Authors
A. V. Chukichev
ITMO University
Russian Federation
Russian Federation
Artemiy V. Chukichev — Post-Graduate Student; Faculty of Control Systems and Robotics
St. Petersburg
O S. Timofeeva
ITMO University
Russian Federation
Russian Federation
Olga S. Timofeeva - PhD; ITMO University, Faculty of Control Systems and Robotics; Assistant
St. Petersburg
Yu S. Andreev
ITMO University
Russian Federation
Russian Federation
Yuriy S. Andreev — PhD, Associate Professor; Faculty of Control Systems and Robotics
St. Petersburg
References
1. Bourne D.A., Corney J.R., Gupta S.K. J. Comput. Inf. Sci. Eng., 2011, vol. 11.
2. Statista, Annual Production of Plastics Worldwide from 1950 to 2020, 2021, https://www.statista.com/statistics/282732/global-production-of-plastics-since-1950.
3. Al-wswasi M., Ivanov A., Makatsoris H. Intern. J. Adv. Manuf. Technol., 2018, vol. 97, pp. 809–832.
4. Shi Y., Zhang Y., Xia K., Hari R.F. Computer-Aided Design and Applications, 2020, vol. 17, pp. 861–899.
5. Babic B.R., Ne'sic N., Miljkovic Z. Artif. Intell. Eng. Des., Anal. Manuf., 2011, no. 03(25), pp. 289–304, DOI: 10.1017/S0890060410000545.
6. Ahn H.K., Berg M., Bose P., Cheng S.W., Halperin D., Matousˇek J., Schwarzkopf O. CAD, 2002, no. 8(34), pp. 547–559.
7. Elber G., Chen X., Cohen E. ASME J. Comput. Inf. Sci. Eng., 2005, no. 2(5), pp. 79–85.
8. Priyadarshi A.K., Gupta S.K. Geometric Modeling and Processing, Lecture Notes in Computer Science, 2006, vol. 4077, pp. 655–662.
9. Zhu J., Kato M., Tanaka T., Yoshioka H., Saito Y. J. Adv. Mech. Des. Syst., 2015, vol. 9.
10. Gao X., Mou W., Peng Y. Procedia CIRP, 2016, vol. 56, pp. 585–589.
11. Zehtaban L., Roller D. Computer-Aided Design and Applications, 2016, vol. 13, pp. 309–319.
12. Xia Q., Etienne A., Dantan J.-y., Siadat A. Comput. Ind. Eng., 2018, vol. 115, pp. 206–219.
13. Yang D, Danai K, Kazmer D. J. of Manufacturing Science and Engineering, 2000, no. 4(123), pp. 682–691.
14. Choudhary A.K., Harding J.A., Tiwari M.K. J. of Intelligent Manufacturing, 2009, vol. 20, pp. 501–521.
15. Li J.-R., Khoo L.P., Tor S.B. J. of Intelligent Manufacturing, 2006, vol. 17, pp. 163–176.
16. Montgomery D.C. Design and Analysis of Experiments, 8th ed. John Wiley & Sons, 2012, 752 p.
17. Yablochnikov E.I., Pirogov A.V., Vasil'kov S.D., Andreev Y.S., Demkovich N.A. J. of Optical Technology, 2017, no. 1(84), pp. 62–67.
18. Yadav R., Joshi S., Kamble N. Intern. J. of Scientific and Engineering Research, 2012, vol. 3, pp. 1–8.
19. Gao H., Zhang Y., Zhou X., Li D. Frontiers of Mechanical Engineering, 2018, vol. 13, pp. 85–95.
20. Khosravani M.R., Nasiri S. J. of Intelligent Manufacturing, 2020, vol. 31, pp. 847–864.
21. Kwong C.K, Smith G.F. Intern. J. Adv. Manuf. Technol., 1998, no. 4(14), pp. 239–246.
22. Mok S.L., Kwong C.K. J. of Intelligent Manufacturing, 2002, no. 3(13), pp. 165–176.
23. Zhou H.M., Zhao P., Feng W. Advances in Polymer Technology, 2007, no. 3(26), pp. 191–205.
24. Dhaliwal J.S., Benbasat I. Information Systems Research, 1996, no. 3(7), pp. 342–362.
25. Liao S.H. Expert Systems with Applications, 2005, no. 1(28), pp. 93–103.
26. Chen W.C., Nguyen M.H., Chiu W.H. et al. Intern. J. Adv. Manuf. Technol., 2016, no. 9–12(83), pp. 1873–1886.
27. Zhao J, Cheng G. Advances in Polymer Technology, 2015, no. 3(35), pp. 288–297.
28. Ozcelik B., Erzurumlu T. Mater. Process Technol., 2006, no. 3(171), pp. 437–445.
29. Farshi B., Gheshmi S., Miandoabchi E. Mater. Des., 2011, no. 1(32), pp. 414–423.
30. Mathivanan D., Parthasarathy N.S. Intern. J. Adv. Manuf. Technol., 2009, no. 45(45), pp. 867–874.
31. Shi H.C., Xie S.M., Wang X.C. Intern. J. Adv. Manuf. Technol., 2013, vol. 65, pp. 343–353.
32. Shie J.R. Intern. J. Adv. Manuf. Technol., 2008, vol. 36, pp. 1091–1103.
33. Gang X., Yang Z.T., Long G.D. Intern. J. Adv. Manuf. Technol., 2012, vol. 58, pp. 521–531.
34. Gang X., Yang Z.T. Intern. J. Adv. Manuf. Technol., 2015, vol. 78, pp. 525–536.
35. Low M., Lee K. Intern. J. Adv. Manuf. Technol., 2003, vol. 21, pp. 807–819, DOI: 10.1007/s00170-002-1397-9.
Review
For citations:
Chukichev A.V., Timofeeva O.S., Andreev Yu.S. Intelligent approaches to automation of technological preparation for polymer products manufacturing by injection molding. Journal of Instrument Engineering. 2023;66(1):16-24. (In Russ.) https://doi.org/10.17586/0021-3454-2023-66-1-16-24
Views:
10
Email this article 