Study of the Latest Dental Materials by Stretching to Obtain the Tensile Strength Parameter
https://doi.org/10.17586/0021-3454-2022-65-8-612-618
Abstract
The latest dental materials are tested by stretching to obtain a tensile strength parameter. The safety of restorative composite materials on the hard tissues of the tooth is ensured by mechanical parameters, so the work is promising and relevant for therapeutic dentistry. For different composites, the tensile strength parameters were obtained using the IM-4R automated tensile testing machine. The strength parameters were measured on thirty specimens where the cross-sectional area of each specimen was 5 mm. The results of measurements of the dependence of strength on the number of dental composites are represented by polynomials of the third degree; the values of approximation reliability are determined.
About the Authors
L. I. Shalamay
Pavlov University
Russian Federation
Russian Federation
Ludmila I. Shalamay — PhD, Associate Professor, Department of Therapeutic Dentistry and Periodontology;
St. Petersburg
E. Yu. Mendosa
A.I. Evdokimov Moscow State University of Medicine and Dentistry
Russian Federation
Russian Federation
Elena Yu. Mendosa — Department of Clinical Dentistry, Assistant
Moscow
E. E. Maiorov
St. Petersburg State University of Aerospace Instrumentation
Russian Federation
Russian Federation
Evgeny E. Maiorov— PhD, Associate Professor, Department of Applied Mathematics
St. Petersburg
V. B. Lampusova
Pavlov University
Russian Federation
Russian Federation
Victoria B. Lampusova — PhD, Associate Professor, Department of Therapeutic Dentistry and Periodontology
St. Petersburg
N. S. Oksas
Pavlov University
Russian Federation
Russian Federation
Nataliya S. Oksas — PhD, Assistant, Department of Therapeutic Dentistry and Periodontology; Assistant
St. Petersburg
References
1. Lutskaya I.K. Prakticheskaya stomatologiya (Practical Dentistry), Minsk, 1999, 360 р. (in Russ.)
2. Novak N.V., Baytus N.A. Vestnik of Vitebsk State Medical University, 2016, no. 1(15), pp. 19–26. (in Russ.)
3. Vinogradova T.V., Ugoleva S.A, Kazantsev N.L., Sidorov A.B., Shevchenko M.V. Novoye v stomatologii, 1995, no. 6, pp. 326. (in Russ.)
4. Grigoriev S.S., Kudinov P.N., Bisyarina L.I. Medico-pharmaceutical journal "Pulse", 2017, no. 10(19), pp. 76–80. (in Russ.)
5. Tokmakova S.I., Lunitsyna Yu.V. Actual problems in dentistry, 2014, no. 5, pp. 30–32. (in Russ.)
6. Tscymbalystov A.V., Kopytov A.A., Chuev V.P., Asadov R.I., Vinakov D.V. RUDN Journal of Medicine, 2018, no. 4(22), pp. 415–420, DOI: 10.22363/2313-0245-2018-22-4-415-420. (in Russ.)
7. Gaidarova T.A., Eremina N.A., Inshakov D.V. Acta Biomedica Scientifica, 2007, no. 6(58), pp. 92–95. (in Russ.)
8. Lutskaya I.K., Marchenko E.I., Chukhrai I.G. Sovremennaya stomatologiya, 2012, no. 1, pp. 29–31. (in Russ.)
9. Majorov E.E., Prokopenko V.T. Biomedical Engineering, 2012, no. 3(46), pp. 109–111.
10. Novak N.V., Baytus N.A. Vestnik of Vitebsk State Medical University, 2017, no. 2(16), pp. 113–119. (in Russ.)
11. Maiorov E.E., Prokopenko V.T., Ushveridze L.A. Biomedical Engineering, 2014, no. 6(47), pp. 304–306. (in Russ.)
12. Kuzmenkov M.I., Sushkevich A.V., Manak T.N. Proceedings of BSTU. Chemistry and technology of inorganic substances, 2011, no. 3, pp. 79–83. (in Russ.)
13. Maiorov E.E., Popova N.E., Shalamay L.I., Tsygankova G.A., Chernyak T.A., Pushkina V.P., Pisareva E.A., Dagaev A.V. News of the Tula state university. Technical sciences, 2018, no. 10, pp. 249–256. (in Russ.)
14. Adamovich E.I., Makedonova Yu.A., Pavlova-Adamovich A.G. Medico-pharmaceutical journal "Pulse", 2017, no. 7(19), pp. 51–53. (in Russ.)
15. Kudryavtsev I.V., Chuloshnikov M.I. Ispytatel'naya mashina tipa IM-4R (Testing Machine Type IM-4R), Moscow, 1949, 36 р. (in Russ.)
Review
For citations:
Shalamay L.I., Mendosa E.Yu., Maiorov E.E., Lampusova V.B., Oksas N.S. Study of the Latest Dental Materials by Stretching to Obtain the Tensile Strength Parameter. Journal of Instrument Engineering. 2022;65(8):612-618. (In Russ.) https://doi.org/10.17586/0021-3454-2022-65-8-612-618
Views:
19
Email this article 