Automatic Detection of Filament Burr in Three-Dimensional Printing Devices
https://doi.org/10.17586/0021-3454-2022-65-8-581-584
Abstract
The problem of filament burr in 3D printing devices is analyzed, a review of existing solutions is carried out, and an original method for automatic detection of scoring is proposed. The proposed method for automating the detection of filament burr in 3D printing devices can provide material savings, equipment safety, and reduce time spent on readjustment and repair of devices due to the timely termination of the emergency process, which as a result guarantees the stability and reliability of the production technology.
About the Authors
P. S. Toporkov
ITMO University
Russian Federation
Russian Federation
Pavel S. Toporkov — Post-Graduate Student, Faculty of Control Systems and Robotics
St. Petersburg
Yu. V. Fedosov
ITMO University
Russian Federation
Russian Federation
Yurу V. Fedosov — PhD, Faculty of Control Systems and Robotics; Associate Professor
St. Petersburg
M. Ya. Аfanasyev
ITMO University
Russian Federation
Russian Federation
Maxim Ya. Аfanasyev — PhD, Faculty of Control Systems and Robotics; Associate Professor
St. Petersburg
References
1. 3D Printer Extruder: Grinding Filament – How to Fix It, https://m.all3dp.com/2/3d-printer-grinding-troubleshooting.
2. How to Prevent Jamming in All-Metal Hot Ends, https://all3dp.com/2/how-to-prevent-jamming-in-all-metal-hot-ends.
3. Santanaa L., Alvesa J.L., Netto A.S. Materials & Design, 2017, https://doi.org/10.1016/j.matdes.2017.09.020.
4. Sen Qian, Kunlong Bao, Bin Zi and Ning Wang, Sensors, 2018, no. 9(18), pp. 2898, https://doi.org/10.3390/s18092898.
5. García J.A., Lara E. and Aguilar L. Sensors, 2020, no. 20(22), pp. 6454, https://doi.org/10.3390/s20226454.
6. Greeff G.P., Schilling M. Additive Manufacturing, 2017, https://doi.org/10.1016/j.addma.2016.12.005.
7. Moretti M., Rossi A., Senin N. Additive Manufacturing, 2021, https://doi.org/10.1016/j.addma.2020.101817.
Review
For citations:
Toporkov P.S., Fedosov Yu.V., Аfanasyev M.Ya. Automatic Detection of Filament Burr in Three-Dimensional Printing Devices. Journal of Instrument Engineering. 2022;65(8):581-584. (In Russ.) https://doi.org/10.17586/0021-3454-2022-65-8-581-584
Views:
14
Email this article 