Features of the practice of developing standards to improve their quality in metrological support tasks
https://doi.org/10.17586/0021-3454-2023-66-6-519-523
Abstract
The importance of taking into account practical experience in the development of metrological standards is analyzed. Two main aspects are considered: the first is knowledge of the procedural features of the development stages, the second is the inclusion of the requirements of regulatory documents that ensure the quality of the performance of metrological tasks.
About the Author
N. V. Grigin
D.I. Mendeleyev Institute for Metrology
Russian Federation
Russian Federation
Nikolay V. Grigin — PhD, Associate Professor; D. I. Mendeleyev Institute for Metrology, Information and Analytical Department, Head of the Department.
St. Petersburg
References
1. https://kodeksy-by.com/zakon_rb_o_tehnicheskom_normirovanii_i_standartizatsii.htm. (in Russ.)
2. http://static.kremlin.ru/media/acts/files/0001201506300047.pdf. (in Russ.)
3. Grigin N.V. Metrologicheskoye obespecheniye innovatsionnykh tekhnologiy (Metrological Support of Innovative Technologies), IV International Forum, St. Petersburg, 2022, рр. 169. (in Russ.)
4. Lomakin M.I., Dokukin A.V., Niyazova Yu.M., Garin A.V. Standarty i kachestvo (Standards and Quality), 2022, no. 4, pp. 32–36, DOI: 10.35400/0038-9692-2022-4-38-22.
5. Budkin Yu.V. Standarty i kachestvo (Standards and Quality), 2021, no. 12, pp. 44–45. (in Russ.)
6. RMG-29 2013 GSI. Metrologiya. Osnovnyye terminy i opredeleniya (RMG-29 2013 GSI. Metrology. Basic terms and definitions), Moscow, 2014. (in Russ.)
7. Makoveev Е.N., Grigoriev А.V. Standarty i kachestvo (Standards and Quality) 2023, no. 1, pp. 16–19, DOI: 10.35400/0038-9692-2023-1-293-22. (in Russ.)
8. GUIDE Standardization and related activities — General vocabulary, ISO/IEC Guide 2:2004.
9. Аronov I.Z. Standarty i kachestvo (Standards and Quality), 2023, no. 1, pp. 34–35. (in Russ.)
Review
For citations:
Grigin N.V. Features of the practice of developing standards to improve their quality in metrological support tasks. Journal of Instrument Engineering. 2023;66(6):519-523. (In Russ.) https://doi.org/10.17586/0021-3454-2023-66-6-519-523
Views:
13
Email this article 