Experimental Study of Acoustic Emission Parameters during Cyclic Testing of Metal Products of Additive Manufacturing
https://doi.org/10.17586/0021-3454-2023-66-2-139-147
Abstract
The kinetics of destruction of metal products made using additive manufacturing technologies, namely, selective laser melting, is studied. Features of this method of products manufacturing process give rise to various kinds of structural inhomogeneities in the material, which, in turn, affect the strength characteristics. The use of the acoustic emis- sion method in the study of fracture kinetics makes it possible to reveal the initiation of fatigue fracture processes in the material.
About the Authors
A. S. Kovalevich
ITMO University
Russian Federation
Russian Federation
Anastasiia S. Kovalevich — Post-Graduate Student; Faculty of Control Systems and Robotics
St. Petersburg
I. Yu. Kinzhagulov
ITMO University
Russian Federation
Russian Federation
Igor Yu. Kinzhagulov — PhD; Faculty of Control Systems and Robotics; teacher
St. Petersburg
K. A. Stepanova
Scientific and Technical Center Etalon
Russian Federation
Russian Federation
Kseniya A. Stepanova — PhD; Department of Scientific and Technical Development; Leading Researcher
St. Petersburg
D. O. Kuzivanov
ITMO University
Russian Federation
Russian Federation
Dmitry O. Kuzivanov — Post-Graduate Student; Faculty of Control Systems and Robotics
St. Petersburg
References
1. Kruth J.-P., Leu M.C., Nakagawa T. CIRP Annals – Manufacturing Technology, 1998, no. 2(47), pp. 525–540, DOI:10.1016/S0007-8506(07)63240-5.
2. Berman B. Business Horizons, 2012, no. 2(55), pp. 155–162, DOI: 10.1016/j.bushor.2011.11.003.
3. ivdon.ru/ru/magazine/archive/n4y2016/3931. (in Russ.)
4. Khajavi S.H., Partanen J., Holmström J. Computers in Industry, 2014, no. 1(65), pp. 50–63, DOI:10.1108/RPJ-03-2017-0052.
5. Song B., Zhao X., Li Sh., Han Ch., Wei Q., Wen Sh., Liu J., Shi Yu. Frontiers of Mechanical Engineering, 2015, no. 2(10), pp. 111–125, DOI: 10.1007/s11465-015-0341-2.
6. Olakanmi E.O., Cochrane R.F., Dalgarno K.W. Progress in Materials Science, 2015, vol. 74, pp. 401–477, DOI: 10.1016/j.pmatsci.2015.03.002.
7. Collins P.C., Haden C.V., Ghamarian I., Hayes B.J., Ales T., Penso G., Dixit V., Harlow G. JOM, 2014, no. 7(66), pp. 1299–1309, DOI:10.1007/s11837-014-1007-y.
8. Stepanova L.N., Pestov N.M., Chaplygin V.N., Kabanov S.I., Kozhemyakin V.L., Lebedev E.Yu., Katarushkin S.A. Kontrol’. Diagnostika (Testing. Diagnostics), 2002, no. 2, pp. 19–24. (in Russ.)
9. Sereznov A.N., Stepanova L.N., Kareev A.E., Kozhemyakin V.L., Lebedev E.Yu., Kabanov S.I., Chaplygin V.N., Katarushkin S.A. Kontrol’. Diagnostika (Testing. Diagnostics), 2002, no. 9, pp. 13–18. (in Russ.)
10. Sereznov A.N., Stepanova L.N., Mitrofanov O.V., Kulikov E.N., Kabanov S.I., Lebedev E.Yu., Chaplygin V.N., Katarushkin S.A. Kontrol’. Diagnostika (Testing. Diagnostics), 2007, no. 7, pp. 56–60. (in Russ.)
11. Apasov A.M. Bulletin of the Tomsk Polytechnic University, 2010, no. 2(316), pp. 32–41. (in Russ.)
12. Vasiliev E.V., Vinogradov A.Yu., Merson D.L., Brilevsky A.I. Aktual'nyye problemy metoda akusticheskoy emissii (Actual Problems of the Acoustic Emission Method), Collection of Materials of the All-Russian Conference with International Participation, Tolyatti, 2018, рр. 76. (in Russ.)
Review
For citations:
Kovalevich A.S., Kinzhagulov I.Yu., Stepanova K.A., Kuzivanov D.O. Experimental Study of Acoustic Emission Parameters during Cyclic Testing of Metal Products of Additive Manufacturing. Journal of Instrument Engineering. 2023;66(2):139-147. (In Russ.) https://doi.org/10.17586/0021-3454-2023-66-2-139-147
Views:
9
Email this article 